About

欧洲国际机床展

EMO Hannover 2025

汉诺威机床展（EMO Hannover）创办于1951年，是由欧洲机床工业合作委员会支持的机床制造业专业展览会。在欧洲两大著名会展城市按“汉诺威-汉诺威-米兰”模型巡展。将展示最新的技术和生产方法，突出未来机床的发展趋势。是世界机床与制造技术行业权威、专业的盛会之一。

Founded in 1951, EMO Hannover (Hannover Machine Tool Show) is a professional exhibition for the machine tool manufacturing industry supported by the Committee for European Cooperation in the Machine Tool Industry (CECIMO). It rotates between two renowned European exhibition cities following the "Hannover-Hannover-Milan" model. The exhibition showcases the latest technologies and production methods, highlighting the development trends of future machine tools. It is one of the authoritative and professional grand events in the global machine tool and manufacturing technology industry.

展会地图

Exhibition Map

▲华锐精密展位 Booth No：HALL 5 — C27

参展亮点产品介绍

Introduction Of Exhibited Products

NO.1 

麒麟系列高温合金加工用刀具

Cutting Tools for Processing Kylin Series Superalloys

华锐精密麒麟系列高温合金加工用刀具涵盖了车削，铣削，切断切槽，整体硬质合金四大系列。

Huareal's Kylin Series cutting tools for superalloy processing cover four major product lines: turning, milling, cut-off and grooving, and solid carbide.

麒麟系列车削刀具

Kylin Series Turning Tools

麒麟系列车削全新牌号HR9205/HR9215,具有亚微米级均匀细化的硬质相晶粒，保证较高的硬度和耐磨性，添加合金元素实现固溶强化和晶界强化，进一步提升安全性，采用特殊涂层成分设计，具有优异的热稳定性和抗氧化性

Kylin Series Turning Tools HR9205 / HR9215 features submicron-level uniformly refined hard phase grains, which ensure high hardness and wear resistance. Alloying elements are added to achieve solid solution strengthening and grain boundary strengthening, further enhancing safety. A special coating composition design is adopted, endowing it with excellent thermal stability and oxidation resistance.

麒麟系列切断切槽刀具

Kylin Series Cut-Off and Grooving Tools

全新的单刃方头切槽刀 HCMA 系列和单刃圆头切槽刀 HPMA 系列，刀片规格完善，通用性强，满足难加工材料对切槽、横车、仿形等加工需求，有效满足对控屑、表面质量和长寿命的多重需求。

The new single-edge square-head grooving tool HCMA series and single-edge round-head grooving tool HPMA series feature complete insert specifications and strong versatility. They meet the processing requirements for grooving, cross turning, profiling, etc., of difficult-to-machine materials, and effectively satisfy the multiple demands for chip control, surface quality and long service life.

麒麟系列可转位铣削刀片

Kylin Series Indexable Milling Inserts

采用全新升级牌号 HR7240，采用均匀分布的硬质相与粘结相，兼顾耐磨性、高韧性和出色的抗疲劳断裂性能，极具外观辨识度的七彩涂层，涂层耐高温性能和高温硬度大幅提升，采用特殊成份设计的合金基体，高温红硬性进一步提升，满足高温合金平面铣、方肩铣、型腔铣等多种工艺需求，实现长寿命和安全性的双重需求。

The indexable milling inserts of the Kylin Series adopt the newly upgraded grade HR7240. Featuring uniformly distributed hard phases and binder phases, they balance wear resistance, high toughness, and excellent fatigue fracture resistance. With the highly recognizable iridescent coating, their high-temperature resistance and high-temperature hardness are significantly improved. The alloy matrix, designed with a special composition, further enhances the hot hardness. These inserts meet the requirements of various processes for superalloys, such as face milling, shoulder milling, and pocket milling, and achieve the dual demands of long service life and safety.

麒麟系列整体硬质合金铣削刀具

Kylin Series Solid Carbide Milling Tools

麒麟系列整体硬质合金铣削刀具采用高性能硬质合金棒料，有效保证刀具的安全性，全新的涂层工艺及后处理技术，优良的耐高温性能，全新的刃口处理工艺和涂层后处理技术，有效保证了刃口的安全性和磨损的均匀性。

The Kylin Series solid carbide milling tools adopt high-performance carbide carbide rods, effectively ensuring the safety of the tools. The new coating process and post-treatment technology provide excellent high-temperature resistance. The new cutting edge treatment process and post-coating treatment technology effectively ensure the safety of the cutting edge and the uniformity of wear.

NO.2 

U系列超级通用型整体硬质合金铣刀

Ultra Series Super Universal Solid Carbide End Mills

Ultra 系列，集超强通用性与超高性能于一体，适用于硬度在 HRC54 以内的工件材料，无论是钢件、铸铁、不锈钢还是钛合金，在各种冷却条件工况下均能发挥出色性能。

The Ultra Series, integrating super versatility and ultra-high performance, is suitable for workpiece materials with a hardness of up to HRC 54. Whether it is steel, cast iron, stainless steel or titanium alloy, it can perform excellently under various cooling conditions.

1.超细晶粒基体，实现产品高韧性及高硬度

Ultra-fine grain matrix, achieving high toughness and high hardness of the product

U系列使用了超细晶粒硬质合金基体，在高、低切削速度下都能实现高的耐磨性能；

特殊的原料配方和优化的烧结工艺，兼顾产品高韧性要求；

The U Series adopts an ultra-fine grain cemented carbide matrix, enabling high wear resistance at both high and low cutting speeds;

With a special raw material formula and optimized sintering process, it meets the requirement for high toughness of the product while maintaining other performance attributes：

2.PVD纳米多层复合涂层，大幅提升产品耐磨性

PVD Nano Multilayer Composite Coating, significantly enhancing the product's wear resistance

独特的PVD纳米多层复合涂层工艺，轻松面对多种冷却条件，提升产品耐磨性；

卓越的高温性能，良好的红硬性和更低的热导率，更好保护刃口；

The unique PVD nano-multilayer composite coating process easily adapts to various cooling conditions and enhances the product's wear resistance;

Its outstanding high-temperature performance, excellent hot hardness, and lower thermal conductivity provide better protection for the cutting edge：

3.特殊的宏观与微观结构设计，高速和重载切削依然稳定

Special macro and micro structural design ensures stability even in high-speed and heavy-load cutting

不等齿距不等螺旋结构，有效抑制加工颤动；

增强的芯厚直径设计，提升抗崩能力；

Unequal pitch and unequal helix structure effectively suppresses machining chatter;

The enhanced core thickness and diameter design improves chipping resistance：

Tech For Better Future

下届展会时间：2027年09月

展会地点：德国 汉诺威

展会行业：机床